D4 Holt Field Gate
Book a Service Appointment
A diamond special field gate that has an intermediate rail, two inner and four half verticals, all made from a similar construction material. Hardwood, Softwood, Accoya or Metal, are all optional materials that this style of gate can be supplied in.
Only timber will offer the chamfered edge effect as a standard optional extra, with metal version not able to offer it. Metal is however far more suitable for maximum width of opening, as each leaf can be stable over a greater span.
Available as a single leaf gate or as a pair of gates, with or without a side gate or infill section and furniture to suit electric gate controls.
Timber or metal support posts with metal recommended above timber for all the usual good reasons. Stability, strength, durability and technical superiority to name just four.
Power operated by hydraulic ram located across the mid rail with a non-locking motor and magnetic closed position lock, this installation has a good performance expectation, with safe operation from induction loops, light curtains and rear photo-beams.
Automatic closing for added security and audio communications for visitor notification and remote control.
Finish colour options will be subject to the actual materials used. High oil content wood, such as Iroko, Cedar Etc. Are not naturally suited to painted or such like treatments, nor are areas of a gate with similar content. Knots on Pine are a typical example of this.